Separating cluster contribution to improve CD distribution using simultaneous dose-focus monitoring on production wafers

Louis-Pierre Armellin; Virginie Dureuil; Olivier Guillaume; Philippe Alet; Brad Eichelberger; Michel Egreteau; Marco Polli; Berta Dinu

doi:10.1117/12.598045

10 May 2005 Separating cluster contribution to improve CD distribution using simultaneous dose-focus monitoring on production wafers

Louis-Pierre Armellin, Virginie Dureuil, Olivier Guillaume, Philippe Alet, Brad Eichelberger, Michel Egreteau, Marco Polli, Berta Dinu

Author Affiliations +

Proceedings Volume 5752, Metrology, Inspection, and Process Control for Microlithography XIX; (2005) https://doi.org/10.1117/12.598045
Event: Microlithography 2005, 2005, San Jose, California, United States

Abstract

As device dimensions shrink the number of parameters influencing CD increases (PEB dispersion, development uniformity, resist thickness, BARC thickness, +/- scan focus control, scanner focus control at edge of the wafer...). Separation between all these contributors is not easy using only CD-SEM measurement, and particularly with isolated lines. For high volume manufacturing (where "time is money") and in the case of litho cluster drift, a quick and accurate diagnostic capability is an advantage for minimizing tool unavailability. An important attribute of this diagnostic capability is that its implementation is on standard production wafers. The use of production wafers enables continuous monitoring and also allows a direct correlation between monitoring measurements and the impact on product. The technology that enables this type of diagnostic capability makes use of a compact dual tone line-end-shortening based target. A key benefit to this technology is that it provides a separation of the dose and focus parameters, which leads to quicker route cause determination. After building a calibration model and determining minimum dose and focus sensitivity, both short term and long term stability of the model is investigated. The impact of wafer topology on model prediction is also investigated in order to assess on-product monitoring capability. The main error contributors are then identified for both track and scanner and the impact on CD control is evaluated. These cluster error contributors are then varied, first separately, and then combined. Measurement results are compared to the input parameters in order to determine error detection ability, measurement accuracy and separation capability.

Citation Download Citation

Louis-Pierre Armellin, Virginie Dureuil, Olivier Guillaume, Philippe Alet, Brad Eichelberger, Michel Egreteau, Marco Polli, and Berta Dinu "Separating cluster contribution to improve CD distribution using simultaneous dose-focus monitoring on production wafers", Proc. SPIE 5752, Metrology, Inspection, and Process Control for Microlithography XIX, (10 May 2005); https://doi.org/10.1117/12.598045

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
12 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Semiconducting wafers

Critical dimension metrology

Scanners

Scanning electron microscopy

Finite element methods

Calibration

Control systems

Show All Keywords

Keywords/Phrases

Search In:

Publication Years