Paper
1 September 2004 Testing centricity of optical elements using point spread function
Author Affiliations +
Abstract
It is shown that a specific position of an axial object point can be found for every optical element, where the spherical aberration is either zero or minimal. If we image this point with an optical element, then its point spread function will be almost identical to the point spread function of the diffraction limited optical system. It can be used for testing of centricity of very precise very precise optical elements, because we can simply detect unsymmetry of the point spread function, which is caused by the decentricity of the tested optical element. Furthermore, one can also use this method for testing optical elements in connection with a cementing process. It is also derived a simple equation for calculation of the coefficient of third order coma, which is caused by a decentricity of the optical surface due to a tilt of the surface with respect to the optical axis.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Antonin Miks and Jiri Novak "Testing centricity of optical elements using point spread function", Proc. SPIE 5456, Photon Management, (1 September 2004); https://doi.org/10.1117/12.545560
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Point spread functions

Optical components

Geometrical optics

Optical testing

Imaging systems

Refraction

Back to Top