Paper
8 July 2004 Solid state dye lasers pumped directly by diode lasers
Dennis P. Pacheco, William H. Russell, Henry R. Aldag
Author Affiliations +
Abstract
We report on the laser characteristics of solid-state dye lasers pumped directly by a pulsed red diode laser. A 1.6-mm thick disk of Oxazine 725 in modified PMMA was excited longitudinally in a nearly hemispherical resonator at ≅671 nm. We operated at rep rates up to 1 kHz, with only a modest drop in energy per pulse at the highest rep rates. (The energy at 1 kHz is ≅83% of that measured at 1 Hz.) The spectral output of this solid-state dye laser was centered at ≅740 nm with a bandwidth (FWHM) of ≅10.5 nm. For a pump pulse of 230 ns (FWHM), the dye laser output was ≅155 ns in duration, and tracked the pump pulse well after turn on. The maximum observed efficiency for a sample containing Ox 725 in modified PMMA was 18%. Data on other solid dye media are also presented.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dennis P. Pacheco, William H. Russell, and Henry R. Aldag "Solid state dye lasers pumped directly by diode lasers", Proc. SPIE 5332, Solid State Lasers XIII: Technology and Devices, (8 July 2004); https://doi.org/10.1117/12.531233
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dye lasers

Solid state lasers

Solid state physics

Semiconductor lasers

Diodes

Resonators

Pulsed laser operation

Back to Top