Paper
2 April 2004 Development of surface connectors for microfluidic systems
Tony C. Liu, Syed Masood, Pio Iovenitti, Erol C. Harvey
Author Affiliations +
Abstract
Microfluidic connectors play a key role in the microfluidic packaging systems. This paper presents the results of a development of a new design of polymeric surface connector for single channel connection between tube and microfluidic chip. The design was evaluated using finite element analysis, which takes into account assembly forces and stresses on components. The design offers an easy and simple connection process and is compatible with most polymeric microfluidic systems using different diameter tubes. Prototype PMMA and polycarbonate connectors have been produced for 1.6 mm diameter PEEK (polyethylethylene ketone) tube. These connectors can be connected and disconnected many times and will be suitable for many cases with special requirements. A series of performance tests, which include leakage, connection and disconnection force test, and reliability, have been conducted and to demonstrate the functionality of sealing and reached excess 1.37 MPa (200 psi.) without leakage and pulling force reached 40 N (9 lbf).
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tony C. Liu, Syed Masood, Pio Iovenitti, and Erol C. Harvey "Development of surface connectors for microfluidic systems", Proc. SPIE 5276, Device and Process Technologies for MEMS, Microelectronics, and Photonics III, (2 April 2004); https://doi.org/10.1117/12.525278
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Connectors

Microfluidics

Polymers

Polymethylmethacrylate

Prototyping

Packaging

Finite element methods

Back to Top