Paper
21 November 2003 Laser beam propagation in gain media
Author Affiliations +
Proceedings Volume 5259, 13th Polish-Czech-Slovak Conference on Wave and Quantum Aspects of Contemporary Optics; (2003) https://doi.org/10.1117/12.545151
Event: 13th Polish-Czech-Slovak Conference on Wave and Quantum Aspects of contemporary Optics, 2002, Krzyzowa, Poland
Abstract
Two models of gain and thermal guiding effects were derived. In the first one the complex ABCD matrix for a crystal under gain and thermal guiding was applied to describe the operation of microchip near threshold. In the second one, the simple iterative procedure was proposed to calculate effective fundamental mode parameters of a cavity under thermal and gain guiding for given bare cavity ABCD matrix and pumping parameters, including gain saturation, passive cavity losses and reabsorption ones. The influence of gain guiding effects causes changes of waist width in the range up to 50% comparing to expectations derived from thermal guiding theory. Application of such method for resonators of passively Q switched lasers was proposed. Results of calculations for microchips were verified with experiment.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan Karol Jabczynski, Jacek Kwiatkowski, and Waldemar Zendzian "Laser beam propagation in gain media", Proc. SPIE 5259, 13th Polish-Czech-Slovak Conference on Wave and Quantum Aspects of Contemporary Optics, (21 November 2003); https://doi.org/10.1117/12.545151
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermal effects

Thermal modeling

Gaussian beams

Refractive index

Diffraction

Laser beam propagation

Mirrors

RELATED CONTENT


Back to Top