Paper
16 June 2003 Masked ion beam lithography and direct structuring on curved surfaces
Hans Loeschner, Herbert Buschbeck, Martin Ecker, Christoph Horner, Elmar Platzgummer, Gerhard Stengl, Michaela Zeininger, Paul Ruchhoeft, John Charles Wolfe
Author Affiliations +
Abstract
We have previously demonstrated (Proc. SPIE Vol. 4688, 595, 2002; JM3 Vol. 2, Nr. 1, 34, 2003) a depth of focus of several millimeters in masked ion beam lithography (MIBL). This work illustrates the use of this capability to pattern concave and convex spherical substrates 25 mm in diameter and 5.5 mm deep. Features as small as 175nm were printed across a convex substrate with 75 keV He+ ions where the mask-to-wafer gap varied from 1 mm on the center to 6.5 mm on the edge. We also demonstrate, for the first time, the fabrication of 800 nm features in a 4 nm thick Cr coating by masked ion beam direct structuring (MIBS), where 45 keV Argon ions sputter the film through a stencil mask. We demonstrate electronic adjustment of the radial beam profile of the incident ion beam to compensate for the continuously changing angle between the beam and the spherical substrate, thus achieving constant exposure dose (for MIBL) or sputtering rate (for MIBS) a 50 × 50 mm2 field.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hans Loeschner, Herbert Buschbeck, Martin Ecker, Christoph Horner, Elmar Platzgummer, Gerhard Stengl, Michaela Zeininger, Paul Ruchhoeft, and John Charles Wolfe "Masked ion beam lithography and direct structuring on curved surfaces", Proc. SPIE 5037, Emerging Lithographic Technologies VII, (16 June 2003); https://doi.org/10.1117/12.482716
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ion beams

Ions

Photomasks

Argon

Ion beam lithography

Chromium

Spherical lenses

Back to Top