Paper
30 May 2003 S-on-1 induced damage thresholds of high-reflection metallic coatings at 1064 nm
Author Affiliations +
Abstract
Measurements on several high-reflection (HR) metallic mirrors were performed, and multiple-pulse laser induced damage thresholds (LIDT) were estimate according to the draft International Standard ISO/DIS 11254 using S on 1 tests at 1064 nm. The experimental set-up was based on Q-switched, diode-pumped Nd:YAG laser. Transmission increase was used for an in situ measurement of damage. The characteristic damage curves were plotted and multiple-pulse damage thresholds were determined at 30-Hz pulse-repetition rate, while the number of pulses varied up to 300.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Virginija Bingelyte, Valdas Sirutkaitis, and Robert C. Eckardt "S-on-1 induced damage thresholds of high-reflection metallic coatings at 1064 nm", Proc. SPIE 4932, Laser-Induced Damage in Optical Materials: 2002 and 7th International Workshop on Laser Beam and Optics Characterization, (30 May 2003); https://doi.org/10.1117/12.472379
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser damage threshold

Aluminum

Beam splitters

Gold

Metallic coatings

Optical coatings

Laser induced damage

Back to Top