Paper
12 September 2002 Design of a high-power semiconductor medical laser based on microprocessor control
Author Affiliations +
Abstract
This paper introduces the design of optics, power driver and control system of a high power semiconductor medical laser. The instrument adopts 980nm laser with maximum power output of 2W as therapeutic beam and 670nm laser of 3mW as aiming beam. The laser beams, after being collimated , can either be transmitted directly or be coupled through an optical fiber. In the driver of therapeutic laser, there exist current supply, protection circuit , temperature controller and light power feedback loop. The whole system is controlled by a microprocessor. With appropriate hardware and software, we've achieved , in our driver ,a variety of protection features including the ability to suppress transients and reduce noise, relay shorting protection , soft turn-on , current limit and overvoltage shut-off ,which keep the laser diode from damage. Meanwhile, we've also obtained a continuously adjustable optical power output with high accuracy and stability , both of which are vital to a safe and reliable
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wendong Zou, Min Chen, and Yiqing Gao "Design of a high-power semiconductor medical laser based on microprocessor control", Proc. SPIE 4916, Optics in Health Care and Biomedical Optics: Diagnostics and Treatment, (12 September 2002); https://doi.org/10.1117/12.482989
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

High power lasers

LASIK

Semiconductors

Control systems

Surgery

Laser therapeutics

RELATED CONTENT


Back to Top