PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
An investigation to apply YAG laser welding to gas turbine components was carried out. The materials of gas turbine such as Ni base alloy are difficult to weld by conventional arc welding methods because of large heat affection. But laser welding can reduce heat input compared with conventional methods and keeps the good repeatability. The welding parameter survey was carried out to satisfy the designing requirements. The YAG laser welding under appropriate conditions enables to prevent welding defects such as HAZ cracks and improves the weld joints quality and performance. Tensile test and low cycle fatigue test were carried out. Tensile strength and fatigue life of laser weld joints are same or higher than that of conventional manual TIG weld joints. The Automatic YAG laser welding system was also developed and put into practical use.
Shuho Tsubota,Masahiko Mega,Koji Takahashi,Yoshitaka Uemura,Norihide Hirota, andKengo Yamaguchi
"Application of YAG laser welding to gas turbine components", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); https://doi.org/10.1117/12.503147
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Shuho Tsubota, Masahiko Mega, Koji Takahashi, Yoshitaka Uemura, Norihide Hirota, Kengo Yamaguchi, "Application of YAG laser welding to gas turbine components," Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); https://doi.org/10.1117/12.503147