Paper
19 October 2001 Determining kinks for 980-nm lasers using time-resolved far-field scan
Martin Hai Hu, Ron Waters, Chung-En Zah
Author Affiliations +
Proceedings Volume 4580, Optoelectronics, Materials, and Devices for Communications; (2001) https://doi.org/10.1117/12.444920
Event: Asia-Pacific Optical and Wireless Communications Conference and Exhibit, 2001, Beijing, China
Abstract
The beam quality of weakly index-guided edge emitting 980nm lasers is investigated via time-resolved far-field measurement technique. A synchronous detection scheme is used to directly measure lasers' far-field pattern, intensity versus divergence angle, as functions of duration and amplitude of injection current pulses. It is shown that the degradation of beam quality, characterized as multiple lateral modes and observed as beam steering of far-field pattern, highly depends on the transient condition associated with the duration of injection current pulses. The beam steering of far-field pattern is well correlated to the kink in power-versus-current curve under the same transient condition. We experimentally found that time constant for the far-field pattern to reach steady state is ~1.4 microsecond. From thermal transience modeling, we conclude that beam steering is the result of local heating, which produces a lateral temperature gradient profile at the laser waveguide region to significantly enhance the lateral index contrast.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Martin Hai Hu, Ron Waters, and Chung-En Zah "Determining kinks for 980-nm lasers using time-resolved far-field scan", Proc. SPIE 4580, Optoelectronics, Materials, and Devices for Communications, (19 October 2001); https://doi.org/10.1117/12.444920
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam steering

Semiconductor lasers

Waveguides

Continuous wave operation

Thermal modeling

Reliability

Single mode fibers

Back to Top