Paper
3 November 1983 Surface Error Analysis For The University Of Texas 7.6m Telescope Primary Mirror
F. B. Ray, Y. T. Chung, B. S. Mani
Author Affiliations +
Abstract
The techniques of modal control analysis derived by Creedon and Lindgren [1], an error analysis method proposed by Howell and Creedon [2], and various methods of finite element analysis are applied to a meniscus mirror of unusually large aspect ratio. The analyses predict the figure error for a set of characteristic error disturbances and correction strategies. Several arrangements of piston actuators are shown to he near optimum relative to the disturbance inputs considered, and in each case the related plots of modal coefficients, rms surface error, and the Howell and Creedon error analysis demonstrate the efficacy of the thin meniscus approach. In addition, the engineering approach to achieving a stable optical surface in this way is shown. Decomposing the distorted optical surface into modal terms gives it a natural order and allows the analyst to demonstrate that for some very harsh mechanical loads, relatively few modes are the chief contributors to the wavefront error. Therefore, by designing the active system for the control of the most significant modes, the mechanical engineering task becomes manageable.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. B. Ray, Y. T. Chung, and B. S. Mani "Surface Error Analysis For The University Of Texas 7.6m Telescope Primary Mirror", Proc. SPIE 0444, Advanced Technology Optical Telescopes II, (3 November 1983); https://doi.org/10.1117/12.937981
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Error analysis

Actuators

Deformable mirrors

Wavefronts

Control systems

Telescopes

Back to Top