Paper
9 February 2001 Recycling of manufactured waste shingles in asphalt paving mixes
Rajib B. Mallick, Walaa S. Mogawer, Matthew R. Teto, Jodie Siegel
Author Affiliations +
Proceedings Volume 4193, Environmentally Conscious Manufacturing; (2001) https://doi.org/10.1117/12.417281
Event: Intelligent Systems and Smart Manufacturing, 2000, Boston, MA, United States
Abstract
About 20,000 tons of manufactured waste asphalt shingles are being deposited in landfill every year in the state of Massachusetts. This has caused a shortage of precious landfill space, and significant increase in deposit fee. There is a need to evaluate the use of these waste shingles in hot mix asphalt, specially because the shingles contain significant amount of asphalt binder, and studies in some states have shown that use of shingles can result in savings, and improve hot mix asphalt performance. A laboratory study was conducted by the Worcester Polytechnic Institute and University of Massachusetts at Dartmouth, with a research grant from the Chelsea Center for Recycling and Economic Development. The results show that volumetric and low temperature property of hot mix asphalt with 3, 5 and 7 percent shingles are not significantly different from the properties of conventional hot mix asphalt used for surface courses. Standard deviation of test results for mixes with shingles are low, indicating consistency in the quality of the shingles. Mixes with 5 and 7 % shingles show significantly lower rutting potential compared to mix without any shingles. Hence, it seems that mixes with small amounts of shingles have the potential of savings as well as good performance. However, before any material can be used regularly, it must be evaluated under real-life production and construction conditions.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rajib B. Mallick, Walaa S. Mogawer, Matthew R. Teto, and Jodie Siegel "Recycling of manufactured waste shingles in asphalt paving mixes", Proc. SPIE 4193, Environmentally Conscious Manufacturing, (9 February 2001); https://doi.org/10.1117/12.417281
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Manufacturing

Resistance

Minerals

Oxides

Cements

Chlorine

Civil engineering

RELATED CONTENT

Root cause analysis of oxide scale forming and shedding in...
Proceedings of SPIE (December 03 2015)
The influence of Ca P ratio on the properties of...
Proceedings of SPIE (November 01 2007)
Comparison of microdeformation in I 70, O 50 and a...
Proceedings of SPIE (November 01 1990)
Use of Rbd to distinguish different failure modes
Proceedings of SPIE (October 23 2000)
Ring shear apparatus and its utilization to soil mechanics
Proceedings of SPIE (October 28 2011)
Yield and reliability of laser-formed vertical links
Proceedings of SPIE (September 15 1993)

Back to Top