Thick porous silicon sacrificial layer formation using implanted mask technology

Alexandra Splinter; Olaf Bartels; Wolfgang Benecke

doi:10.1117/12.396428

25 August 2000 Thick porous silicon sacrificial layer formation using implanted mask technology

Alexandra Splinter, Olaf Bartels, Wolfgang Benecke

Author Affiliations +

Proceedings Volume 4174, Micromachining and Microfabrication Process Technology VI; (2000) https://doi.org/10.1117/12.396428
Event: Micromachining and Microfabrication, 2000, Santa Clara, CA, United States

Abstract

Surface micromachining is an established micro technology. The process is only limited by sacrificial layer thickness and sometimes a disturbing surface topology. This paper describes an innovative surface micromachining technology. Standard surface micromachining allows layer thickness of a few micrometer. Using porous silicon as sacrificial layer, it is possible to create any layer thickness up to 100 micrometers . Thick porous silicon sacrificial layers are used to combine the advantages of standard surface micromachining with the advantages of bulk micromachining. The problems resulting form surface topology are eliminated by using ion implanted masks. Based on different porous silicon formation mechanism for - and p-type silicon, it is possible to use n- implanted layers as masking material during the anodization of p-type silicon, resulting in a planar surface. For this masking technology, no additional masking layers are required. For free standing membrane generation it is possible to deposit e.g. a PECVD-layer on top of the porous silicon layer. If required, e.g. to protect free standing structures during following process steps from mechanical failures, it is possible to remove sacrificial layers with diluted alkaline solution in a final process step after dicing. A complete process flow has been developed for thick porous silicon layers up to 100 micrometers . The use of this sacrificial layer technology for thermally isolate gas sensor membrane fabrication and the detailed process parameters will be presented.

Citation Download Citation

Alexandra Splinter, Olaf Bartels, and Wolfgang Benecke "Thick porous silicon sacrificial layer formation using implanted mask technology", Proc. SPIE 4174, Micromachining and Microfabrication Process Technology VI, (25 August 2000); https://doi.org/10.1117/12.396428

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Silicon

Surface micromachining

Standards development

Bulk micromachining

Gas sensors

Ions

Keywords/Phrases

Search In:

Publication Years