Visual servoing for automatic and uncalibrated percutaneous procedures

Michael H. Loser; Nassir Navab; Benedicte Bascle; Russell H. Taylor

doi:10.1117/12.383049

18 April 2000 Visual servoing for automatic and uncalibrated percutaneous procedures

Michael H. Loser, Nassir Navab, Benedicte Bascle, Russell H. Taylor

Author Affiliations +

Proceedings Volume 3976, Medical Imaging 2000: Image Display and Visualization; (2000) https://doi.org/10.1117/12.383049
Event: Medical Imaging 2000, 2000, San Diego, CA, United States

Abstract

Visual servoing is well established in the field of industrial robotics, when using CCD cameras. This paper describes one of the first medical implementations of uncalibrated visual servoing. To our knowledge, this is the first time that visual servoing is done using x-ray fluoroscopy. In this paper we present a new image based approach for semi-automatically guidance of a needle or surgical tool during percutaneous procedures and is based on a series of granted and pending US patent applications. It is a simple and accurate method which requires no prior calibration or registration. Therefore, no additional sensors, no stererotactic frame and no additional calibration phantom is needed. Our techniques provides accurate 3D alignment of the tool with respect to an anatomic target and estimates the required insertion depth. We implemented and verified this method with three different medical robots at the Computer Integrated Surgery (CIS) Lab at the Johns Hopkins University. First tests were performed using a CCD-camera and a mobile uniplanar x-ray fluoroscope as imaging modality. We used small metal balls of 4 mm in diameter as target points. These targets were placed 60 to 70 mm deep inside a test-phantom. Our method led to correct insertions with mean deviation of 0.20 mm with CCD camera and mean deviation of about 1.5 mm in clinical surrounding with an old x-ray imaging system, where the images were not of best quality. These promising results present this method as a serious alternative to other needle placement techniques, which require cumbersome and time consuming calibration procedures.

Citation Download Citation

Michael H. Loser, Nassir Navab, Benedicte Bascle, and Russell H. Taylor "Visual servoing for automatic and uncalibrated percutaneous procedures", Proc. SPIE 3976, Medical Imaging 2000: Image Display and Visualization, (18 April 2000); https://doi.org/10.1117/12.383049

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE