Performance of polycrystalline silicon waveguide devices for compact on-chip optical interconnection

Kevin K. Lee; Desmond R. Lim; Anuradha Agarwal; Daniel Ripin; Harry H. Fujimoto; Michael Morse; Lionel C. Kimerling

doi:10.1117/12.371246

26 November 1999 Performance of polycrystalline silicon waveguide devices for compact on-chip optical interconnection

Kevin K. Lee, Desmond R. Lim, Anuradha Agarwal, Daniel Ripin, Harry H. Fujimoto, Michael Morse, Lionel C. Kimerling

Author Affiliations +

Proceedings Volume 3847, Optical Devices for Fiber Communication; (1999) https://doi.org/10.1117/12.371246
Event: Photonics East '99, 1999, Boston, MA, United States

Abstract

Optical interconnects offer advantages over electrical interconnects in terms of clock skew, crosstalk, and RC delay for ULSI (Ultra Large Scale Integrated-Circuit) silicon technology. Optical interconnects are also applicable in optical communications where compact optical devices are fabricated and incorporated in an on-chip integrated optical system. Polycrystalline silicon (polySi)/SiO₂ is an attractive waveguiding system that offers significant advantages in both applications with its compact size and compatibility with multilevel CMOS processing. Based on the process optimization that led to a low-loss polySi material, we have fabricated compact waveguide bends and splitters that were microns in size. To study the modal behavior in bending and splitting, we compared multi-mode and single-mode waveguides that were used in fabricating bends and splitters. Two waveguide cross-section dimensions, 0.5 micron X 0.2 micron and 2 microns X 0.2 microns, were used for single- mode waveguide and multi-mode waveguide, respectively. Micron- sized bending was realized with a low loss of a few dBs. Single-mode bends showed less than 3 dB loss for a bending radius of 3 microns, which was lower than that for multi-mode bends. Two different types of splitters, single-mode Y- splitters and multi-mode Y-splitters were fabricated and characterized in terms of their splitting uniformity. One X four and 1 X 16 optical power distribution systems were built based on different splitting schemes and their output power uniformity was compared. Due to the high dielectric contrast of our polySi/SiO₂ waveguide system, the smallest 1 X 16 optical power distribution was realized in an area smaller than 0.0001 cm².

Citation Download Citation

Kevin K. Lee, Desmond R. Lim, Anuradha Agarwal, Daniel Ripin, Harry H. Fujimoto, Michael Morse, and Lionel C. Kimerling "Performance of polycrystalline silicon waveguide devices for compact on-chip optical interconnection", Proc. SPIE 3847, Optical Devices for Fiber Communication, (26 November 1999); https://doi.org/10.1117/12.371246

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE