Paper
14 June 1999 Pattern measurements of reticles with optical proximity correction assist features using the atomic force microscope
Kuo-Jen Chao, Robert J. Plano, Jeffrey R. Kingsley, J. Fung Chen, Roger F. Caldwell
Author Affiliations +
Abstract
A 4X, 6 inch reticle with optical proximity correction assist feature intended for deep UV (DUV) exposure was investigated. A set of chrome lines with designed CD from 0.24 to 2.00 microns was profiled by AFM. The goal of this work is to present a method to ensure consistent measurement of chrome lines widths on the reticle. This is done by consistently measuring the line width at the half-height position on the line cross-section, i.e., full width at half maximum. Defining the boundaries of the line width at the half height locations of the edge steps. Using this method, the CD linearity is found to be within +/- 20 nm over a range of line width form 2.00 micrometers to 0.4 micrometers . Additionally, the CD uniformity is found to be worse when the widths of the lines are nominally less than 0.4 micrometers .
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kuo-Jen Chao, Robert J. Plano, Jeffrey R. Kingsley, J. Fung Chen, and Roger F. Caldwell "Pattern measurements of reticles with optical proximity correction assist features using the atomic force microscope", Proc. SPIE 3677, Metrology, Inspection, and Process Control for Microlithography XIII, (14 June 1999); https://doi.org/10.1117/12.350787
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Atomic force microscopy

Chromium

Optical proximity correction

Reticles

Deep ultraviolet

Photomasks

Critical dimension metrology

Back to Top