Paper
10 February 1999 Development of a fiber optic REMPI probe for environmental contaminants
Author Affiliations +
Proceedings Volume 3534, Environmental Monitoring and Remediation Technologies; (1999) https://doi.org/10.1117/12.339030
Event: Photonics East (ISAM, VVDC, IEMB), 1998, Boston, MA, United States
Abstract
On-site determination of volatile organic pollutants in ground water supplies is important for remediation. A simple fiber- optic probe suitable for remote analysis using resonance enhanced multiphoton ionization has been developed and is used to determine the toluene concentration in water samples spiked with gasoline via a head space measurement. An optical fiber transmits a high power laser pulse (266 nm) to the sample, ionizing it, and the subsequent ions are collected with a platinum electrode. Measurements take approximately 1.5 minutes to perform, require no sample preparation, and have been demonstrated over distances of five meters. The limit of detection for toluene in water using this probe is 1.54 plus or minus 0.02 ppb (wt/wt). In addition to the 1 + 1 excitation, the feasibility of a 2 + 2 excitation scheme using 532 nm has been investigated.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brian M. Cullum and S. Michael Angel "Development of a fiber optic REMPI probe for environmental contaminants", Proc. SPIE 3534, Environmental Monitoring and Remediation Technologies, (10 February 1999); https://doi.org/10.1117/12.339030
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Calibration

Fiber optics

Fiber lasers

Optical fibers

Ionization

Fiber optics tests

Back to Top