Paper
26 May 1998 Control system of the VLT secondary mirror unit
Joerg Flemmig, Gerald Praeger, Karsten Baumann
Author Affiliations +
Abstract
The main functions of the control system for the very large telescope (VLT) secondary mirror unit are to control the focusing, centering and tilt/chopping movement of the secondary mirror. The most challenging feature of the VLT M2 unit is to tilt the mirror with very high precision and dynamic requirements in chopping and field stabilization mode. During chopping the mirror is tilted up to 10 times per second with a maximum chopping step of 120 arcsec about an arbitrary axis. In the field stabilization mode the mirror has to follow any angular reference signal up to 10 Hz bandwidth with a very high precision. This paper gives an overview on the VLT M2 unit control system with emphasis on the development and realization of chopping control The finally achieved performance and the gained experience are presented.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joerg Flemmig, Gerald Praeger, and Karsten Baumann "Control system of the VLT secondary mirror unit", Proc. SPIE 3351, Telescope Control Systems III, (26 May 1998); https://doi.org/10.1117/12.308792
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Control systems

Digital signal processing

Telescopes

Electronics

Optical amplifiers

Sensors

RELATED CONTENT

Design of ground motion compensation servo system
Proceedings of SPIE (May 21 2013)
Adaptive secondary mirrors for the Large Binocular Telescope
Proceedings of SPIE (February 07 2003)
Actuators For A Segmented Mirror Control System
Proceedings of SPIE (November 03 1983)
The LINC-NIRVANA fringe and flexure tracker control system
Proceedings of SPIE (September 12 2012)
Adaptive secondary mirror for the 6.5 m conversion of the...
Proceedings of SPIE (September 27 1999)

Back to Top