Paper
24 July 1998 Region-of-interest cone-beam CT with a spiral scan
Kwok C. Tam, Supun Samarasekera, Frank Sauer
Author Affiliations +
Abstract
A method is developed which makes it possible to scan and reconstruct an object with cone beam x-ray in a spiral scan path with area detectors much shorter than the length of the object. The method is mathematically exact. If only a region- of-interest of the object is to be imaged, a top circle scan at the top level of the region-of-interest and a bottom circle scan at the bottom level of the region-of-interest are added. The height of the detector is required to cover only the distance between adjacent turns in the spiral projected at the detector. To reconstruct the object, the Radon transform for each plane intersecting the object is computed from the totality of the cone beam data. This is achieved by suitably combining the cone beam data taken at different source positions on the scan path; the angular range of the cone beam data required at each source position can be determined easily with a mask which is the spiral scan path projected on the detector from the current source position. The spiral scan algorithm has been successfully validated with simulated cone beam data.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kwok C. Tam, Supun Samarasekera, and Frank Sauer "Region-of-interest cone-beam CT with a spiral scan", Proc. SPIE 3336, Medical Imaging 1998: Physics of Medical Imaging, (24 July 1998); https://doi.org/10.1117/12.317026
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Detection and tracking algorithms

Radon

Reconstruction algorithms

Radon transform

X-rays

X-ray computed tomography

RELATED CONTENT


Back to Top