Diffusivity measurements in polymers: IV. Acid diffusion in chemically amplified resists

Katherine E. Mueller; William J. Koros; Chris A. Mack; C. Grant Willson

doi:10.1117/12.275837

7 July 1997 Diffusivity measurements in polymers: IV. Acid diffusion in chemically amplified resists

Katherine E. Mueller, William J. Koros, Chris A. Mack, C. Grant Willson

Author Affiliations +

Proceedings Volume 3049, Advances in Resist Technology and Processing XIV; (1997) https://doi.org/10.1117/12.275837
Event: Microlithography '97, 1997, Santa Clara, CA, United States

Abstract

Many of the strategies for sub 0.25 micrometer lithography depend on chemically amplified resists to provide sensitivity. For example, glass damage limits the dose that can be delivered at 193 nm, and source brightness limits the dose that can be delivered in the EUV. However, acid diffusion, an integral part of the chemical amplification process, dramatically affects the lithographic performance of chemically amplified resists. The transport properties of Bronsted acids in glassy polymers have been estimated from a variety of indirect measurements. We have, for the first time, directly measured the diffusion coefficients of acids in polymer films. A quartz crystal microbalance (QCM) was used to make the measurements. The QCM can detect small changes in mass which is indicated by a shift in the resonant frequency of the piezoelectric quartz crystal (see the accompanying paper 'Diffusivity measurements in Polymers, Part III: Quartz Crystal Microbalance Techniques'). The experiments were conducted at different temperatures in order to establish the dependence of the diffusion coefficient on temperature. Acid diffusion in poly(hydroxystyrene) is discussed. The results obtained from the diffusion experiments have been used in lithographic simulation (PROLITH). Results of acid diffusion in poly(hydroxystyrene) are discussed.

Citation Download Citation

Katherine E. Mueller, William J. Koros, Chris A. Mack, and C. Grant Willson "Diffusivity measurements in polymers: IV. Acid diffusion in chemically amplified resists", Proc. SPIE 3049, Advances in Resist Technology and Processing XIV, (7 July 1997); https://doi.org/10.1117/12.275837

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE