Paper
1 December 1995 High-efficiency replicated diffractive optics
C. Gary Blough, Dean Faklis, Stephen K. Mack, Robert L. Michaels, Sam J. Ward
Author Affiliations +
Abstract
Diffractive optics technology offers optical system designers new degrees of freedom that can be used to optimize the performance of optical systems. The zone spacing of a diffractive lens can be chosen to impart focusing power as well as aspheric correction to the emerging wavefront. The surface (or blaze) profile within a given zone determines the diffraction efficiency of the element, or in other words, determines how the incident energy is distributed among the various diffraction orders. Unless the zone profile is generated with high fidelity, incident energy will be distributed into extraneous diffraction orders, which generally reduces the optical system performance. Several diffractive optical components have been fabricated using replication techniques that provide high-efficiency and accurate wavefront generation. Typical minimum efficiency measurements at the design wavelength for diffractive zone spacings greater than 10 micrometers are 95% or above. For minimum zone features as small as 5 micrometers , the measured efficiency is greater than 85% at the design wavelength. The integrated diffraction efficiency, which is a weighted measure of the efficiency across the clear aperture, is typically 2 - 3% more than the efficiency measurement at the minimum feature.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Gary Blough, Dean Faklis, Stephen K. Mack, Robert L. Michaels, and Sam J. Ward "High-efficiency replicated diffractive optics", Proc. SPIE 2600, Design, Fabrication, and Applications of Precision Plastic Optics, (1 December 1995); https://doi.org/10.1117/12.227909
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction

Modulation transfer functions

Optical components

Optics manufacturing

Surface finishing

Chemical elements

Fabrication

RELATED CONTENT

Measurement methods to build up the digital optical twin
Proceedings of SPIE (February 20 2018)
Ready to use a multi focal system based on Alvarez...
Proceedings of SPIE (June 05 2018)
Slope error tolerances for optical surfaces
Proceedings of SPIE (May 14 2007)
A Statistical Approach To Lens Tolerancing
Proceedings of SPIE (December 01 1978)
The cost of tolerancing
Proceedings of SPIE (August 28 2009)

Back to Top