Preparation, Characterization and Reaction in Oxygen of Cu2S Films

A. W. Czanderna; E. T. Prince; H. F. Helbig

doi:10.1117/12.970588

25 November 1980 Preparation, Characterization and Reaction in Oxygen of Cu₂S Films

A. W. Czanderna, E. T. Prince, H. F. Helbig

Author Affiliations +

Proceedings Volume 0248, Role of Electro-Optics in Photovoltaic Energy Conversion; (1980) https://doi.org/10.1117/12.970588
Event: 24th Annual Technical Symposium, 1980, San Diego, United States

Abstract

The purpose of this paper is to present an extended summary of the oral presentation given at the 24th SPIE Symposium. Details of the rationale for the study, methods, procedures, and results are available.1 The object of this work was to prepare cuprous sulfide films by sulfiding copper in a mixture of hydrogen sulfide and hydrogen, to characterize the films, and to establish that solar cell device grade cuprous sulfide could be prepared by a method that permits characterization of the pure material before, during, and after reaction in degrading environments. Copper films, deposited in vacuum onto a substrate suspended from a quartz ultramicrobalance, were sulfided in mixtures of hydrogen sulfide and hydrogen until the composition cuprous sulfide was reached. With the gravimetric apparatus, the optical transmittance (T) and reflectance (R) were also obtained in situ at intervals during the deposition and sulfiding processes. The sulfided films were characterized by SEM, ISS, ESCA, SIMS, diffraction, profilometry, resistivity, and Hall techniques after removal from the balance. Between 70 and 94°C and with hydrogen/hydrogen sulfide ratios between 11 and 39:1, copper films can be sulfided to cuprous sulfide in 30-36 hours to produce cuprous sulfide films 100 to 400 nm thick. The SEM data show the films are smooth enough to deduce the optical constants from the T and R data. The carrier mobility and optical properties were found to be comparable with those reported for device grade cuprous sulfide. Composition in depth profiles show only copper and sulfur can be detected in the films, except for a trace of surface oxygen. The well-characterized cuprous sulfide films were found to be stable up to 100°C when heated in 13.3 kPa of oxygen, and after a slow reaction up to ca. 225°C, formed cuprous oxide and cupric sulfate at 300°C.

Citation Download Citation

A. W. Czanderna, E. T. Prince, and H. F. Helbig "Preparation, Characterization and Reaction in Oxygen of Cu₂S Films", Proc. SPIE 0248, Role of Electro-Optics in Photovoltaic Energy Conversion, (25 November 1980); https://doi.org/10.1117/12.970588

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE