Paper
24 April 1995 Modeling of an optically controlled FET
V. K. Singh, B. P. Singh
Author Affiliations +
Abstract
In recent years, the GaAs IC fabricated from Schottky gate field effect transistor (MESFET) have emerged as a promising technology for the development of high speed digital circuits. Optically controlled characteristics of the FET have been analyzed by singh etal which was used as a dual gate switching or memory device. The first gate used as a virtual gate where light is incident and another is the real gate where the bias is being applied. The present paper deals the modelling of in optically controlled GaAs FET. The basic physics behind above device is that when optical radiation is incident on the transparent or semitransparent GaAs, the electronhole pairs are generated just below the gate within the gate depletion region, resulting the changes in the relevant parameters of the device. However, the traps present at the surface recombine via deep traps reduces the device performance. The results present the design criteria for such device in terms of trap center density either at or close to the surface of the GaAs material and the diffusion effect. The device is also observed to be useful either as a power device or switching device in addition to the detecting device.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. K. Singh and B. P. Singh "Modeling of an optically controlled FET", Proc. SPIE 2397, Optoelectronic Integrated Circuit Materials, Physics, and Devices, (24 April 1995); https://doi.org/10.1117/12.206925
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Field effect transistors

Gallium arsenide

Bismuth

Modulation

Diffusion

Switching

Control systems

Back to Top