Paper
4 January 1995 Recent advances in laser triangulation-based measurement of airfoil surfaces
Omer L. Hageniers
Author Affiliations +
Proceedings Volume 2349, Industrial Optical Sensors for Metrology and Inspection; (1995) https://doi.org/10.1117/12.198670
Event: Photonics for Industrial Applications, 1994, Boston, MA, United States
Abstract
The measurement of aircraft jet engine turbine and compressor blades requires a high degree of accuracy. This paper will address the development and performance attributes of a noncontact electro-optical gaging system specifically designed to meet the airfoil dimensional measurement requirements inherent in turbine and compressor blade manufacture and repair. The system described consists of the following key components: a high accuracy, dual channel, laser based optical sensor, a four degree of freedom mechanical manipulator system and a computer based operator interface. Measurement modes of the system include point by point data gathering at rates up to 3 points per second and an 'on-the-fly' mode where points can be gathered at data rates up to 20 points per second at surface scanning speeds of up to 1 inch per second. Overall system accuracy is +/- 0.0005 inches in a configuration that is useable in the blade manufacturing area. The systems ability to input design data from CAD data bases and output measurement data in a CAD compatible data format is discussed.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Omer L. Hageniers "Recent advances in laser triangulation-based measurement of airfoil surfaces", Proc. SPIE 2349, Industrial Optical Sensors for Metrology and Inspection, (4 January 1995); https://doi.org/10.1117/12.198670
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Picture Archiving and Communication System

Sensors

Calibration

Inspection

Light scattering

Computing systems

Control systems

RELATED CONTENT

The WEAVE observatory control system
Proceedings of SPIE (July 10 2018)
Quality control of the ESO-VLT instruments
Proceedings of SPIE (January 02 2002)
PACS according to Murphy what can and will go...
Proceedings of SPIE (May 16 2002)
The Use Of Expert Systems For Preprocessing Image Data
Proceedings of SPIE (March 29 1988)

Back to Top