Automated sampling path planning model for complex surface of cylinder gear based on laser scanning techniques

Sen Zhou; Jian Xu; Jin Zhou; Shuang Mao; Wei Zhang

doi:10.1117/12.3032826

4 December 2024 Automated sampling path planning model for complex surface of cylinder gear based on laser scanning techniques

Sen Zhou, Jian Xu, Jin Zhou, Shuang Mao, Wei Zhang

Author Affiliations +

Proceedings Volume 13283, Conference on Spectral Technology and Applications (CSTA 2024); 1328308 (2024) https://doi.org/10.1117/12.3032826
Event: Conference on Spectral Technology and Applications (CSTA 2024), 2024, Dalian, China

Abstract

In modern manufacturing, the in-process measurement of complex surface of cylindrical gear is critical and challenging, and is directly associated with subsequent assembly and terminal gear quality. 3D geometric measurements of gear are ones of the crucial fundamental quantities to ensure their conformity to design specifications serving a range of industries, from shipping, automotive and aerospace industries to house applications. In this paper, an automated sampling path planning model is designed in order to obtain a loss cost sampling path by consider of the complex surface of cylinder gear. The high-precision full information model of tooth flank is also being established, which depends on the measurement procedure and the measurement uncertainty. A series of experiment on several typical cylindrical gears were carried out to demonstrate this automated path planning technique and the final geometric measurement accuracy. On the other hand, an commercial 3D geometric measuring system was also introduced, which has two degrees of laser scanner. Those scanning paths generation have been proven to be amenable for practical purposes through many tests so that it might be applicable to achieve 3D geometric measurements of large gear.

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Sen Zhou, Jian Xu, Jin Zhou, Shuang Mao, and Wei Zhang "Automated sampling path planning model for complex surface of cylinder gear based on laser scanning techniques", Proc. SPIE 13283, Conference on Spectral Technology and Applications (CSTA 2024), 1328308 (4 December 2024); https://doi.org/10.1117/12.3032826

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE