Neutral solid polymer electrolyte for printed thin film transistors

Zhi Yi Wang; Alvin Virya; Guan Ying Wang; Zachary Comeau; Ta-Ya Chu; Keryn Lian

doi:10.1117/12.3028023

30 September 2024 Neutral solid polymer electrolyte for printed thin film transistors

Zhi Yi Wang, Alvin Virya, Guan Ying Wang, Zachary Comeau, Ta-Ya Chu, Keryn Lian

Proceedings Volume 13125, Organic and Hybrid Transistors XXIII; 1312503 (2024) https://doi.org/10.1117/12.3028023
Event: Organic Photonics + Electronics, 2024, San Diego, California, United States

Abstract

The increased demand for lightweight wearable technology for health monitoring requires thin and flexible devices with low operation voltage to replace bulky conventional silicon-based rigid electronics. Neutral pH solid polymer electrolytes are promising alternatives to those traditional dielectric materials; the high dielectric constant of these aqueous based electrolytes enables the electrolyte gated field effect transistors (EGFETs) to operate at low voltage, while also facilitating integration into flexible and wearable devices. This study shows the integration of a solid polymer electrolyte with printed polymer semiconductor to create an EGFET device patterned on a flexible polymer substrate, in which the electrolyte forms a free standing, mechanically stable film. Electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to assess the compatibility of the electrolyte with the polymer semiconductor and the gold electrodes. Fabricated EGFET devices with inkjet printed semiconductor and drop cast solid polymer electrolyte demonstrated good transistor behaviour with ~10³ ON/OFF ratio at < 1.2 V operation, with minimal performance degradation over at ambient condition for three days. The printability of the polymer semiconductor can further enable facile, high throughput fabrication of the EGFETs, while the flexible and lightweight nature of the substrate allows for integration with wearable electronics. Overall, the solid polymer electrolyte showed good integration with thin film transistors, with the potential to replace the conventional dielectrics in flexible and wearable electronics.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Zhi Yi Wang, Alvin Virya, Guan Ying Wang, Zachary Comeau, Ta-Ya Chu, and Keryn Lian "Neutral solid polymer electrolyte for printed thin film transistors", Proc. SPIE 13125, Organic and Hybrid Transistors XXIII, 1312503 (30 September 2024); https://doi.org/10.1117/12.3028023

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available