Fringe tracking controller modeling for a stellar imaging CubeSat optical interferometer

Mason Black; Leonid Pogorelyuk; Jonathan Ashcom; Kerri Cahoy

doi:10.1117/12.3020092

28 August 2024 Fringe tracking controller modeling for a stellar imaging CubeSat optical interferometer

Mason Black, Leonid Pogorelyuk, Jonathan Ashcom, Kerri Cahoy

Proceedings Volume 13095, Optical and Infrared Interferometry and Imaging IX; 130951I (2024) https://doi.org/10.1117/12.3020092
Event: SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

Abstract

Terrestrial optical interferometers have produced the first resolved images of main-sequence stellar surfaces by using long co-phased baselines and correcting for atmospheric errors using fringe tracking and closure phases. These stellar surface images are helpful for understanding the formation, dynamical structure, and evolution of stars, and also for evaluating the potential habitability of exoplanetary systems. However, the astronomical targets suitable for ground based interferometric imaging remain limited due to restricted baseline diversity, atmospheric absorption in the ultraviolet and much of the infrared, and shot noise limits on the fringe tracker when observing faint objects through tropospheric turbulence. A spaceborne formation flying optical interferometer could potentially image dimmer targets with longer baselines, but must still contend with disturbances like propulsive stationkeeping and attitude control system noise. This work simulates on-orbit fringe tracking controller performance under representative disturbances for a small three-spacecraft Michelson interferometer, and evaluates the effects of imperfect fringe tracking on the measured visibilities. We investigate fringe tracker design options, including the choice of optical path delay estimator(s), number of spectral channels, and integration time. Assuming 10cm subapertures, we compute limiting target magnitudes and the maximum baseline beyond which noise dominates the interferometric visibility measurements. Based on this analysis, we identify design parameters for a cost effective demonstration mission that could complement ground-based stellar surface imaging capabilities.

Conference Presentation

Citation Download Citation

Mason Black, Leonid Pogorelyuk, Jonathan Ashcom, and Kerri Cahoy "Fringe tracking controller modeling for a stellar imaging CubeSat optical interferometer", Proc. SPIE 13095, Optical and Infrared Interferometry and Imaging IX, 130951I (28 August 2024); https://doi.org/10.1117/12.3020092

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available