Paper
23 January 1990 Testing Fiber Optic Couplers In A Mass Production Environment
D. R. Maack, M. Corke, A. Hu, L. Sawyer, S. Steele
Author Affiliations +
Abstract
Optical fiber technology is finding wide ranging applications in many areas including communications and sensors. In applications, such as "Fiber to the Home" (FTTH), large quantities of fiber optic components will be used and subjected to environments not usually encountered in "Central Office" applications. In Figure 1 a typical "POTS/Video" subscriber loop topology is shown. Telephone service (POTS) will operate in a bidirectional mode over a single fiber at one wavelength and video will be broadcast over a second wavelength to the subscriber. From the figure it can be seen that the link for a single subscriber requires two 3 dB couplers at wavelength 1 and two Wavelength division multiplexers operating at wavelengths 1 and 2. If interactive video, such as Video-Phone, is required an additional two 3 dB couplers, operating at wavelength 2, will be needed.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. R. Maack, M. Corke, A. Hu, L. Sawyer, and S. Steele "Testing Fiber Optic Couplers In A Mass Production Environment", Proc. SPIE 1180, Tests, Measurements, and Characterization of Electro-Optic Devices and Systems, (23 January 1990); https://doi.org/10.1117/12.963461
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Manufacturing

Fiber optics tests

Multiplexers

Fiber optics

Video

Control systems

Optics manufacturing

RELATED CONTENT

"Reliability Of Fiber Optic Lans"
Proceedings of SPIE (February 23 1987)
Reliability Testing Of Fused Couplers
Proceedings of SPIE (February 23 1989)
The Role Of Standards In The Growth Of Fiber Optics...
Proceedings of SPIE (February 23 1987)

Back to Top