Paper
5 November 2020 An investigation of data fusion for defects inspection in additive manufacturing
Author Affiliations +
Proceedings Volume 11568, AOPC 2020: Optics Ultra Precision Manufacturing and Testing; 115681V (2020) https://doi.org/10.1117/12.2580276
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China
Abstract
Additive Manufacturing (AM) technology is considered as one of the most promising manufacturing technologies in the areas of aerospace and defense industries. However, the AM parts are known to have relatively high residual stresses and a variety of defects, such as porosity, balling, cracking, etc. Therefore, it is critically important to monitor the quality of products during the AM manufacturing process. In this paper, we proposed a novel enhanced fusion algorithm based on Finite Discrete Shearlet Transform (FDST) and multi-scale sequential toggle operator (MSSTO) for visible and infrared images fusion in the AM systems. The original images can be decomposed into low-frequency and high-frequency subband images by FDST. Then, the effective bright and dark image informations are extracted from the low frequency coefficients of source images by MSSTO transform, which are injected into the fusing low frequency coefficient to obtain the final low frequency synthetic coefficient. The high frequency sub-band coefficients are fused by using the local spatial frequency weighting and region energy. The fused image can be obtained by the FDST inverse transformation of the high and low fused coefficient. Experiments show that the proposed algorithm can get more texture information while retaining the significant features of the images, acheiving good detection and indetification results of the defects properties.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xing Peng and Lingbao Kong "An investigation of data fusion for defects inspection in additive manufacturing", Proc. SPIE 11568, AOPC 2020: Optics Ultra Precision Manufacturing and Testing, 115681V (5 November 2020); https://doi.org/10.1117/12.2580276
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image fusion

Infrared imaging

Infrared radiation

Visible radiation

Additive manufacturing

Manufacturing

Image processing

Back to Top