Paper
5 November 2020 Calculation of verticality in large-aperture optical centering machinery turning
Yu Lei, Xing Fu, Shifa Kang, Xihong Fu
Author Affiliations +
Proceedings Volume 11568, AOPC 2020: Optics Ultra Precision Manufacturing and Testing; 115680W (2020) https://doi.org/10.1117/12.2579432
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China
Abstract
Large-Aperture Optical Centering Machinery Turning technology has been widely used in precision optical machine assembly. The main principle is to make optical axis and machine axis coincide by maintaining the collimation image and structural end face unchanged when rotating. Structural parts are fabricated precisely after than. This process requires good verticality between the end face of the optical element and its optical axis. A specific method is required to calculate the verticality of the end face and the optical axis. This paper proposed a method based on self-collimated image deviation control and least squares fitting. Combining with an example, numerical calculation is carried out with error analysis. Finally the verticality is 21um which provides reliable data guarantee for the selection of the reference during optical centering fabricating processing.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu Lei, Xing Fu, Shifa Kang, and Xihong Fu "Calculation of verticality in large-aperture optical centering machinery turning", Proc. SPIE 11568, AOPC 2020: Optics Ultra Precision Manufacturing and Testing, 115680W (5 November 2020); https://doi.org/10.1117/12.2579432
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical components

Error analysis

Collimation

Motion controllers

Precision optics

Spindles

Precision mechanics

Back to Top