Paper
19 November 2019 Numerical modeling and simulations on splitting of chirped optical pulses in heavily doped thulium fiber amplifiers through modal instability analysis
Author Affiliations +
Abstract
In this paper, mathematical model and simulations displaying the phenomenon of modal instability (MI) in 1050 nm pumped heavily doped Thulium (Tm3+) fiber amplifier is presented. Pulse splitting effect through MI with variation in chirp parameter and non-linear fiber length was modeled and simulated. The pulses considered were sech, Gaussian, and super-Gaussian type. Model was computationally solved on MatLab and the results were verified by incorporating similar conditions and parameters on OptiSystem 16 simulation platform. Results concludes the optimum non linear length (LNL) and the chirp parameter (C = 12) which has to be taken so as to obtain continues time domain pulse train as well as linearly spaced frequency combs. The repetition rate of 500 MHz for 4 ps pulse at 1460 nm with peak sub-pulse energy of 8 nJ was obtained and has been reported to the first time (under MI mechanism) to the authors' knowledge. Optimum TDFA length was concluded as 375 m at which MI phenomenon was triggered.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mohd Mansoor Khan and Ramesh Kumar Sonkar "Numerical modeling and simulations on splitting of chirped optical pulses in heavily doped thulium fiber amplifiers through modal instability analysis", Proc. SPIE 11195, Quantum and Nonlinear Optics VI, 1119510 (19 November 2019); https://doi.org/10.1117/12.2538902
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Thulium

Computer simulations

Numerical modeling

Optical amplifiers

Frequency combs

Mathematical modeling

RELATED CONTENT


Back to Top