Paper
29 March 2019 A method of mechanical properties temperature dependence test by two-sided laser irradiation heating
Author Affiliations +
Proceedings Volume 11046, Fifth International Symposium on Laser Interaction with Matter; 110461M (2019) https://doi.org/10.1117/12.2524025
Event: Fifth International Symposium on Laser Interaction with Matter, 2018, Changsha, China
Abstract
For mechanical properties temperature dependence test in high temperature rising rate, a method of heating specimen using two-sided laser irradiation is proposed. Simulation about different materials in laser heating about different laser power density and different laser duration were conducted. The result shows that two-sided laser irradiation can obviously improve the temperature field of the specimen in normal laser irradiating. The simulation shows that this method is better for metal than composite materials because of the heating pyrolisys may have a bad influence on the thermal balance. Based on this method, the tensile strength temperature dependence of the T700 carbon fiber laminate was obtained. The result is close to the parameter obtained in electrical mechanical machine by furnace heating. The research can make a reference for the mechanical properties test of composite materials or metal in high temperature with high heating rate.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiawei Wang, Yongxiang Zhu, Chenghua Wei, Yuwei Lv, Zhiliang Ma, and Lijun Wang "A method of mechanical properties temperature dependence test by two-sided laser irradiation heating", Proc. SPIE 11046, Fifth International Symposium on Laser Interaction with Matter, 110461M (29 March 2019); https://doi.org/10.1117/12.2524025
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top