The influence of the truncation window size on the quantitative thermographic results after a pulsed test on an aluminium sample: comparison among different post-processing algorithms

Ester D'Accardi; Davide Palumbo; Rosanna Tamborrino; Umberto Galietti

doi:10.1117/12.2518984

3 May 2019 The influence of the truncation window size on the quantitative thermographic results after a pulsed test on an aluminium sample: comparison among different post-processing algorithms

Ester D'Accardi, Davide Palumbo, Rosanna Tamborrino, Umberto Galietti

Author Affiliations +

Proceedings Volume 11004, Thermosense: Thermal Infrared Applications XLI; 110040M (2019) https://doi.org/10.1117/12.2518984
Event: SPIE Defense + Commercial Sensing, 2019, Baltimore, MD, United States

Abstract

Pulsed thermography is a commonly used infrared thermal technique for non-destructive evaluation of engineering materials and components. The quality of the obtained results, in terms of sizes and depths of the researched defects depends mostly on the data processing methods and the observed time intervals. This work is focused on the algorithms used for processing the thermal data after a pulsed test: Pulsed Phase Thermography (PPT), Principal Component Thermography (PCT), Thermographic Signal Reconstruction^® (TSR^®), Slope and R². The work focuses on an aluminium sample with shallow imposed defects and regards the post-processing analysis with different algorithms by considering different lengths of the cooling sequence (time interval or number of frames) and the investigation of the correlation between the signal contrast and the aspect ratio of defects. This correlation represents a first attempt for estimating the size and the depth of the defects, with a new empirical approach. Results show as the influence of the truncation window size changes according to the algorithm used for data analysis and the depth and the size of the detected defects. Moreover, each algorithm has its own peculiarities and capabilities and a synergic action in defects detection and characterization can be obtained if more algorithms are applied on the same thermal sequence.

Conference Presentation

Citation Download Citation

Ester D'Accardi, Davide Palumbo, Rosanna Tamborrino, and Umberto Galietti "The influence of the truncation window size on the quantitative thermographic results after a pulsed test on an aluminium sample: comparison among different post-processing algorithms", Proc. SPIE 11004, Thermosense: Thermal Infrared Applications XLI, 110040M (3 May 2019); https://doi.org/10.1117/12.2518984

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available