Paper
4 March 2019 Imaging and non-imaging illumination of DLP for high resolution headlamps
Author Affiliations +
Abstract
Matrix-LED systems offer different functionalities to increase road safety, e.g. glare-free high beam and marking light. Shortly after their introduction, efforts have been made to increase the amount of pixels. One of the results is the EVIYOS LED consisting of 1024 individually controllable pixels, which practically set the stage for pixel light systems. Current efforts to implement high-resolution pixel light systems are focused towards the exploration of an efficient light source in combination with the use of spatial light modulators. One approach to implement high-resolution pixel light systems is the use of LED arrays as a light source to illuminate a DLP. Unlike video projectors which require a homogeneous illumination of the DLP in order to obtain a homogeneous projection, headlamps require an inhomogeneous light distribution with high illuminance in the center. In order to receive a high system efficiency preforming the desired illuminance onto the active area of the modulator is advantageous. To further increase the systems efficiency an imaging illumination of the DLP, where the images of the emission surfaces of the LEDs are superposed onto the active area of the DLP, is worthwhile. In this paper, concepts for imaging and non-imaging illumination strategies of a DLP for high resolution headlamps will be introduced. For both illumination strategies the most promising concept will be selected to set up an optical system to illuminate a DLP. The paper concludes with a comparative analysis of the imaging and non-imaging optical system with regards to the system architecture and system efficiency.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peer-Phillip Ley and Roland Lachmayer "Imaging and non-imaging illumination of DLP for high resolution headlamps", Proc. SPIE 10932, Emerging Digital Micromirror Device Based Systems and Applications XI, 109320O (4 March 2019); https://doi.org/10.1117/12.2507436
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Digital Light Processing

Modulators

Prisms

Headlamps

Imaging systems

Light sources

RELATED CONTENT

Using the toroidal and cylindrical lenses to project the RGB...
Proceedings of SPIE (September 25 2013)
Requirements on LEDs for advanced optical systems
Proceedings of SPIE (February 13 2007)
LED illuminator for a microdisplay projector
Proceedings of SPIE (October 19 2012)
Requirements on LEDs in etendue limited light engines
Proceedings of SPIE (April 25 2008)
Optical concept for an active headlamp with a DMD array
Proceedings of SPIE (April 28 2008)

Back to Top