High volume semiconductor manufacturing using nanoimprint lithography

Zenichi Hamaya; Junichi Seki; Toshiya Asano; Keita Sakai; Ali Aghili; Makoto Mizuno; Jin Choi; Chris Jones

doi:10.1117/12.2501008

3 October 2018 High volume semiconductor manufacturing using nanoimprint lithography

Zenichi Hamaya, Junichi Seki, Toshiya Asano, Keita Sakai, Ali Aghili, Makoto Mizuno, Jin Choi, Chris Jones

Proceedings Volume 10810, Photomask Technology 2018; 108100F (2018) https://doi.org/10.1117/12.2501008
Event: SPIE Photomask Technology + Extreme Ultraviolet Lithography, 2018, Monterey, California, United States

Abstract

Nanoimprint lithography manufacturing equipment utilizes a patterning technology that involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. The technology faithfully reproduces patterns with a higher resolution and greater uniformity compared to those produced by photolithography equipment. Additionally, as this technology does not require an array of widediameter lenses and the expensive light sources necessary for advanced photolithography equipment, NIL equipment achieves a simpler, more compact design, allowing for multiple units to be clustered together for increased productivity. In this paper, we review the progress and status of the FPA-1200NZ2C wafer imprint system and FPA-1100NR2 mask replication system. To address high volume manufacturing concerns, an FPA-1200NZ2C four-station cluster tool is used in order to meet throughput and cost of ownership requirements (CoO). Throughputs of up to 90 wafers per hour were achieved by applying a multi-field dispense method. Mask life of up to 125 lots, using a contact hole test mask were demonstrated. A mix and match overlay of 3.4 nm has also been achieved and a single machine overlay across the wafer of 2.1nm in X, 1.9nm in Y was also demonstrated. In addition, data is also presented on mask replication. Critical elements of a replication platform include image placement (IP) accuracy and critical dimension uniformity (CDU). Data is presented on both of these subjects. With respect to image placement, an IP accuracy (after removing correctables) of 0.8nm in X, 1.0nm in Y has been demonstrated.

Citation Download Citation

Zenichi Hamaya, Junichi Seki, Toshiya Asano, Keita Sakai, Ali Aghili, Makoto Mizuno, Jin Choi, and Chris Jones "High volume semiconductor manufacturing using nanoimprint lithography", Proc. SPIE 10810, Photomask Technology 2018, 108100F (3 October 2018); https://doi.org/10.1117/12.2501008

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available