A novel imaging spectrometer form for the solar reflective spectral range for size, weight, and power limited applications

Michael P. Chrisp; Ronald B. Lockwood; Melissa A. Smith; Christopher Holtsberg; Gregory Balonek; Kurtis J. Thome; Sachidananda R. Babu; Parminder Ghuman

doi:10.1117/12.2324453

23 October 2018 A novel imaging spectrometer form for the solar reflective spectral range for size, weight, and power limited applications

Michael P. Chrisp, Ronald B. Lockwood, Melissa A. Smith, Christopher Holtsberg, Gregory Balonek, Kurtis J. Thome, Sachidananda R. Babu, Parminder Ghuman

Author Affiliations +

Proceedings Volume 10780, Multispectral, Hyperspectral, and Ultraspectral Remote Sensing Technology, Techniques, and Applications VII; 107800L (2018) https://doi.org/10.1117/12.2324453
Event: SPIE Asia-Pacific Remote Sensing, 2018, Honolulu, Hawaii, United States

Abstract

The intense development in imaging spectrometers and related technology has yielded systems that are highly performing. Current grating-based designs utilize focal plane arrays with aberrations controlled to a fraction of a detector element and low F-numbers for high étendue to maximize the signal to noise performance. Tailored grating facets using two or more blaze angles optimize the optical efficiency across the full 400-2500 nm solar reflective spectral range. Two commonly used forms, the Offner-Chrisp and Dyson designs, are adaptations of microlithographic projectors with a concave or convex mirror replaced by a shaped grating; maintain a high degree of spatial-spectral uniformity. These gratings are relatively difficult to manufacture using either e-beam lithography or diamond machining. The challenge for optical designers is to create optical forms with reduced size, weight, and power (SWaP) requirements while maintaining high performance. We have focused our work in this area and are developing a breadboard prototype imaging spectrometer that covers the full VNIR/SWIR spectral range at 10 nm spectral sampling, has a large swath of 1500 spatial samples, and is compact. The current prototype is for an F/3.3 system that is 7 cm long with an 8 cm diameter with aberration control better than 0.1 pixel assuming an 18 μm pixel pitch. The form utilizes a catadioptric lens and a flat dual-blaze immersion grating. The flat grating simplifies manufacturing and we are currently exploring the manufacture of the grating through grayscale optical lithography where the entire pattern can be exposed at once without stitching errors.

Citation Download Citation

Michael P. Chrisp, Ronald B. Lockwood, Melissa A. Smith, Christopher Holtsberg, Gregory Balonek, Kurtis J. Thome, Sachidananda R. Babu, and Parminder Ghuman "A novel imaging spectrometer form for the solar reflective spectral range for size, weight, and power limited applications", Proc. SPIE 10780, Multispectral, Hyperspectral, and Ultraspectral Remote Sensing Technology, Techniques, and Applications VII, 107800L (23 October 2018); https://doi.org/10.1117/12.2324453

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available