The progress of the lasers and the detectors in the near IR spectral range requires a re-evaluation of the PRN cw lidar potential. Here we address the performances of this lidar for surface detection (altimetry) in planetary missions. The evaluation is based on the following system configuration: (i) A cw fiber amplifier as lidar transmitter. The seeding laser exhibits a single-frequency spectral line, with subsequent amplitude modulation. The fiber amplifier allows high output power level, keeping the spectral characteristics and the modulation of the seeding light input. (ii) An avalanche photodiode in photon counting detection; (iii) Measurement scenarios representative for Earth, Mercury and Mars. |
1.INTRODUCTIONThe PRN cw (Pseudo-random noise continuous wave) backscatter laser radar (lidar) with amplitude modulation of the transmitted radiation is described in [1-3] and has been suggested for a number of applications [3-6]. This lidar technique allows the use as transmitter of all solid state sources as laser diodes, fiber amplifiers, etc. The potential result is a compact, robust and power efficient laser radar system, convenient for space missions. The detection performances of the PRN cw lidar is prone to the optical background more than the ones of the pulse lidar. The performances are also degrade by stronger scattering features in the probed path [7, 8]. In this respect, the rangefinding and the altimetry are well suited for PRN cw lidar application, because the surface backscatter is much stronger than the scattering originating from subvisible atmospheric features. The recent progress in the fiber amplifiers, combined with stable single-frequency diode lasers as master oscillators (MO), provides a convenient lidar transmitter for PRN cw lidar. Such transmitter allows the use of ultra-narrow band optical filters what leads to a substantial decrease of the detected optical background. This recent technology development requires a re-considering of the PRN cw lidar applications, already noted in [6]. This study presents performance simulations of surface detection by a perspective PRN cw backscatter lidar on orbiting platform. The considered measurement scenarios are surface probing of the Earth, Mars and Mercury. 2.PRN-CW LIDAR PRINCIPLESIn the PRN cw lidar the probing radiation is modulated by a PRN digital code, where “0”-s and “1”-s correspond to “full power” and “no power” in the transmitted beam [1,2,7]. The cross-correlation function of the detected backscattered signal with the initial PRN code gives the response function of the probed media or respectively, of the probed surface. The evaluation of the detection performances of the planetary altimeter includes the following: the evaluation of the Signal-to-Noise Ratio for the determination of the peak of the cross-correlation function of the backscattered (back-reflected) signal from the surface. Related to this is the determination of the probability of detection [9] and the range uncertainty [10]. In terms of received number of photons from the surface and from the atmosphere, the SNR of the PRN cw backscatter lidar is expressed as [1-3, 7] The value is the cross-correlated backscattered photon-counts number arriving from the surface located at altitude range-gate “j”, averaged over the sequences. Following [1, 2], this value is given as Here ξd is the detection efficiency, P0 is the averaged transmitted power, τc is the single bin duration in the PRN sequence and is the response function of the surface. In (1) are as follows: the mean value of the detected backscattered photon-counts per bin and sequence from all probed ranges (all range gates), the same mean values for the photon-counts of the optical background and the detector dark noise. The values L and N are the numbers of the PRN sequences in the single measurement and the number of the bins in the PRN sequence. The value in the denominator of (1) includes the backscatter signal arriving not only from the surface but also from the atmosphere. In this way, the backscatter and extinction of the atmosphere (determined by its molecular and aerosol components) contributes to the performances of the PRN lidar in two ways: first - by the round-trip attenuation and second – by adding shot-noise via the integrated backscatter signal along the probed profile. In conditions of transparent atmosphere (i.e., no opaque clouds) the atmospheric contribution in this noise term may be small compared to the contribution of the surface backscatter. 3.INPUTS FOR THE NUMERICAL SIMULATIONSThe presented simulations are performed for the concept for a PRN cw lidar altimeter presented in Fig. 1. The transmitter is based on a low-power cw diode laser (further referred as master oscillator or MO). The beam from the MO is modulated by a fast PRN code via convenient optical modulator. The PRN modulated beam is sent to the input of a fiber amplifier. In this way the transmitted beam has the spectral characteristics of the cw laser and the power is determined by the fiber amplifier gain. The bandwidth may be down to hundreds of MHz while the power may exceed several tens of W [11, 12]. The narrowband transmitter radiation provides the possibility to use in the receiver an ultra-narrow-band filter, a technique already in development for other space programs [13]. A recent reference for photon counting solid–state detectors is [14]. The basic subsystem specifications of the assumed PRN cw lidar, considered further in the numerical simulations, are presented in Table 1. Table 1.Subsystem specifications PRN lidar altimeter.
We consider the following measurement scenarios: satellite-borne laser radar for altimetry of Earth, Mercury and Mars, where all three cases are considered both in day and nigh conditions. The influence of the planetary atmosphere (critical both in attenuator and backscattering) is accounted in the cases of Earth and Mars probing. The relevant parameters for the numerical simulations are presented in Table 2. Table 2.Characteristics of the considered measurement scenarios.
The objective of this work is only a feasibility study of the PRN cw lidar performance with respect to altimetry, so the selected subsystem performances may be characterised only as “representative”, taking into account the present day optical technology. There is no attempt in the presented work for optimisation of subsystem specifications or definition of requirements. The consistency of this approach was tested using a PRN cw lidar demonstrator described in [15]. The demonstrator operates with a cw laser diode at 780nm with a transmitted power of 11mW and a photon-counting detector. The diameter of the receiver telescope is 20cm. The PRN bin and sequence length were respectively 100ns and 9 bit. Fig. 2 presents the cross-correlated signal from a masonry surface located at 4400m from the lidar with integration time of 0.204sec. This measured signal is compared with a calculated one. To define the inputs for this signal calculations, the lidar specifications and the albedo of the probed surface were carefully evaluated in series of calibration measurements. The specifications were used as inputs in the numerical simulations of a signal from the masonry wall, with realistic assumptions for the atmospheric contribution in round-trip transmission and the atmospheric backscatter. The result from the calculations of the PRN cw cross-correlated signal is presented in Fig. 3. As we may see, the result from the simulations appears almost identical to the measurement, what gives a confidence to the approach used in this work. 4.NUMERICAL RESULTS: PROBING OF EARTH SURFACEFig. 4 presents the calculated PRN cw cross-correlate lidar signal in the following scenario: probing Earth surface, night-time, surface at 500m asl (above sea level). The determination of the range (altitude) to the surface from the cross-correlated PRN cw lidar response may follow the “threshold approach”, similar as it is in the pulse laser altimeters [16]. In evaluation of the detection performances of the planetary altimeter in such approach it is of importance to calculate also the cumulative probability for surface detection. In the case of the PRN cw lidar this value is the cumulative probability to obtain cross-correlated signal above a given threshold. Since in the considered case the detection is in photon-counting mode the probability shall be calculated for Poisson signal statistics [6]. Both the probability of detection and the range uncertainty are functions of the SNR, i.e., the starting “figure of merit” in such evaluation is the calculation of the SNR. Fig. 5 presents representative examples for the SNR of surface detection. The results from the calculations are presented for both nighttime and daytime. The detection probability and the range (altitude) uncertainty are presented only for daytime case in Figs. 6 and 7. The results in Figs. 6 and 7 show that a detection probability of more than 98% may be achieved for transmitted power of 20-30W. The ranging error may reach 23 -25cm, where the PRN clock bin is 1ns. It shall be noted that the SNR depends on the integration time of the measurement, not on the duration of the clock bin. That is, with a shorter bin of the PRN modulation code, the ranging error may be decreased with respect to the one in Fig. 7, with the same integration time. 5.NUMERICAL RESULTS: PROBIG MARS AND MERCURY SURFACEFrom point of view of PRN cw lidar, the probing of Mars and Mercury surfaces, shall account for different problems. Mars is a planet with atmosphere containing a aerosol, determining considerable optical depth [17, 18]. Mercury does not present such problem. On the other hand, the daytime optical background at Mercury orbit is about 16 times higher than the one at Mars orbit, what creates stronger requirements for the bandwidths of the transmitted beam and the optical filter. In this sense, it is interesting to see how the detection performances will differ for daytime and nighttime probing for these two planets. Here we present only the detection probably and range uncertainty. The results for Mars are presented in Figs. 8 and 9. The results for Mercury are presented in Fig. 10 and 11. The presented results in Figs. 8 and 9 demonstrate that the PRN cw altimeter may be very convenient for Mars (as well as for planets and moons beyond the orbit of Mars). High detection probability and low range uncertainty are achieved with a moderate transmitted power of 15-20W, even for a considerable aerosol OD. It shall be noted that this performances are for a lidar with receiver diameter of 50cm, i.e. the same as in the already operational altimeter MOLA [16] and much less than the one assumed for Earth probing (Table 1). The results for Mercury probing are different. As it may be expected, the performances in the nighttime probing are relatively high. On the other hand, due to the high level of the optical background, to obtain reasonable performances during the daytime probing a transmitter power of more than 40W is required. 5.CONCLUSIONFrom the presented results we may conclude the following:
The fiber amplifiers, suggested for use in this concept, are industrial product with applications in the telecommunication and in the material processing. These devices are suited for operation with high duty cycle and are optimal as PRN cw lidar transmitter. The detector technology based on photon counting APD is also industrial product. Narrow-band filters are realised with respect for perspective Space missions. As it was already pointed, the objective of this study is only a demonstration of the feasibility of the PRN lidar approach to planetary altimetry. Anyway, the present approach and numerical tools may be used in future optimisation of such sensors, with respect to the imposed detection requirements in specific applications. REFERENCESTakeuchi N., et al.,
“Random modulation cw lidar,”
Applied Optics, 22
(9), 1382
–1386
(1983). Google Scholar
Takeuchi N. et al.,
“Diode-laser random- modulation cw lidar,”
Applied Optics, 25 63
–67
(1986). Google Scholar
Abshire J.B., et al,
“Altimetry and lidar using AlGaAs laser modulated with pseudo-random codes,”
in 16th ILRC, Nasa Conference Publication,
441
–445
(1992). Google Scholar
Nasagava C. et al,
“Random modulation CW lidar using a new random sequence,”
Applied Optics, 29 1466
–1470
(1990). Google Scholar
Norman D.M, Gardner C.S.,
“Satellite laser ranging using pseudonoise code modulated laser diodes,”
Applied Optics, 27 3650
(1988). Google Scholar
Abshire J. B. et al,
“Laser Altimetry Using Pseudo Noise Code Modulated Fiber Lasers and Photon Counting Detectors,”
CLEO/QELS and PhAST, Baltimore – USA. Paper JTh14.2005). Google Scholar
Matthey R, Mitev V.,
“Computer model study of pseudo-random noise modulation, continuous-wave (PRN-cw) backscatter lidar,”
SPIE, 2505 140
–149
(1995). Google Scholar
Machol Janet L.,
“Comparison of the pseudorandom noise code and pulsed direct-detection lidars for atmospheric probing,”
Appl. Optics, 36
(24), 6021
–6023
(1997). Google Scholar
Jelalian A.V.,
“Laser Radar Systems,”
Artech House, London-Boston
(1991). Google Scholar
Carmer D. C. and Peterson L. M.,
“Lares radar in robotics,”
in Proc. IEEE,
299
–320
(1996). Google Scholar
Yusim A. et al,
“100 watt single –mode CW lineary polarised all-fiber format 1.56µm laser with suppression of parasitic lasing effects,”
Fiber Lasers II: Technology, Systems and ApplicationsSPIE, 5709 69
–77 San Jose, USA
(2005). Google Scholar
Liem A., et al,
“100-W single frequency master-oscillator fiber power amplifier,”
Opt. Lett, 28 1537
–1539
(2003). Google Scholar
Bond R. A. et al,
“High-resolution optical Filtering technology,”
in Proceedings ESA,
239
–242
(2004). Google Scholar
Pauchard A., A. Rochas,
“Single-Photon Counters get a second wind,”
102
–106 Photonic Spectra, March2005). Google Scholar
Matthey R. et al,
“PRN-cw backscatter measurements with a powerful narrowband diode laser,”
Advances of Atmospheric Remote Sensing with Lidar - Selected papers of the 18th ILRC, 115
–118 Springer,1997). Google Scholar
Abshire J.B., Xiaoli Sun and Robert S. Afzal,
“Mars Orbiter Laser Altimeter: receiver model and performance analysis,”
Appl. Opt, 39 2449
–2460
(2000). Google Scholar
Pollack J.B., Ockert-Bell M.E., Shepard M.K.,
“Viking Lander image analysis of Martian atmospheric dust,”
J. Geophys. Res, 100
(E3), 5235
–5250
(1995). Google Scholar
Smith P.H., et al,
“Results from the Mars Pathfinder camera,”
Science,
(278), 1758
–1765
(1997). Google Scholar
|