Presentation + Paper
3 May 2017 Methodology for using active infrared spectroscopy in standoff detection of trace explosives
Author Affiliations +
Abstract
This manuscript describes a mobile stand-off detection and identification of trace amounts of hazardous materials, specifically explosives. The technique utilizes an array of tunable infrared quantum cascade lasers as an illumination source which spans wavelengths from 6 to 11 μm, operated at eye-safe power levels. This spectral range enables excitation of a wide variety of absorption bands present in analytes of interest. The laser is modulated to produce a 50% duty cycle, square wave pulses, and control the frequency of irradiation. The backscatter and photo-thermal signals from samples are measured via an IR focal plane array, which allows for the observation of spatial, temporal, and thermal surface processes. A discussion of how these signals are collected and processed for use in identification of hazardous materials is presented.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christopher J. Breshike, Christopher A. Kendziora, Robert Furstenberg, Viet Nguyen, and R. Andrew McGill "Methodology for using active infrared spectroscopy in standoff detection of trace explosives", Proc. SPIE 10183, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing XVIII, 1018302 (3 May 2017); https://doi.org/10.1117/12.2262199
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal processing

Backscatter

Image processing

Absorption

Diffuse reflectance spectroscopy

Explosives

Quantum cascade lasers

Back to Top