Paper
14 December 2016 Analysis of power supply circuits for electroluminescent panels
Andrei Drumea, Robert Alexandru Dobre
Author Affiliations +
Proceedings Volume 10010, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VIII; 100101D (2016) https://doi.org/10.1117/12.2246102
Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies 2016, 2016, Constanta, Romania
Abstract
The electroluminescent panel is a light emitting device that requires for normal operations alternative voltages with peak to peak amplitudes in 100V… 300V range and frequencies in 100Hz … 2 kHz range. Its advantages, when compared with standard light sources like incandescent lamps, gas-discharge lamps or light emitting diodes (LEDs), are lower power consumption, flexible substrate and uniform light without observable luminous points. One disadvantage of electroluminescent panels is the complex power supply required to drive them, but the continuous improvement in passive and active integrated devices for switched mode power supplies will eventually solve this issue. The present paper studies different topologies for these power supplies and the effect of the electric parameters like the amplitude, frequency, waveform of the supplying voltage on the light emission and on power consumption for electroluminescent panels with different size and colors.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrei Drumea and Robert Alexandru Dobre "Analysis of power supply circuits for electroluminescent panels", Proc. SPIE 10010, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VIII, 100101D (14 December 2016); https://doi.org/10.1117/12.2246102
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Power supplies

Transformers

Device simulation

Light

Analog electronics

Lamps

Light emitting diodes

RELATED CONTENT

Aerial 3D LED display by use of retroreflective sheeting
Proceedings of SPIE (March 12 2013)
Smart power supply system for LED street lighting
Proceedings of SPIE (February 20 2015)
UV LED based lightweight fixed wavelength detector for the...
Proceedings of SPIE (February 14 2018)
Optimization design of multifunctional xenon lamp trigger
Proceedings of SPIE (November 05 2020)
The research of lamp for the growing of green plants
Proceedings of SPIE (January 12 2005)
Solid state lighting in buildings: status and future
Proceedings of SPIE (August 18 2010)

Back to Top