Thermal characteristics of CO2, Argon, and KTP (Nd:YAG) ablated bone

Brian Jet-Fei Wong M.D.; Joseph Neev; Jon P. Lee; George T. Hashisaki M.D.; Michael W. Berns

doi:10.1117/12.209110

12 May 1995 Thermal characteristics of CO₂, Argon, and KTP (Nd:YAG) ablated bone

Brian Jet-Fei Wong M.D., Joseph Neev, Jon P. Lee, George T. Hashisaki M.D., Michael W. Berns

Proceedings Volume 2395, Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems V; (1995) https://doi.org/10.1117/12.209110
Event: Photonics West '95, 1995, San Jose, CA, United States

Abstract

CO₂ (10.6 micrometers ), Argon (514 nm), and KTP (Nd:YAG) (532 nm) are the lasers of choice for the stapedotomy operation. While each of these lasers is effective in surgically treating otosclerosis, few studies exist which compare the relative deleterious effects of these lasers in a model that is relevant to clinical practice and also based on the physics of laser- tissue interactions. This study focuses on surface temperature changes that occur in otic capsule, cortical, and lamellar bone when treated with clinical laser energy densities. Fresh porcine otic capsule, cortical, and lamellar bone were micromachined to a uniform thickness of 0.8 mm. A microspot manipulator was used for CO₂, testing both continuous wave (CW) and super-pulse (SP) modes. A focused lens based system was used for argon, and a micro fiber was used for KTP. A Hg-Cd-Te infrared imaging system was used to measure temperature. Hot spot temperatures were recorded, as well as the full width-half maximum of the thermal disturbance at that time. The time for the hot spot to return to ambient temperature was also recorded. With visible wavelengths, the experiments were performed in the presence and absence of an initiator (black ink). Temperature elevations with CW CO₂ were markedly elevated relative to SP mode. The CW irradiated tissue also required longer to cool. In both KTP and argon treated bone, minimal surface temperature elevation was recorded in the absence of an initiator. No surface modification was observed by light microscopy. In contrast, the addition of an initiator resulted in marked temperature elevations and significant surface carbonization with these visible wavelengths. The mechanisms of ablation and thermal conduction are discussed along with the clinical relevance of these findings.

Citation Download Citation

Brian Jet-Fei Wong M.D., Joseph Neev, Jon P. Lee, George T. Hashisaki M.D., and Michael W. Berns "Thermal characteristics of CO₂, Argon, and KTP (Nd:YAG) ablated bone", Proc. SPIE 2395, Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems V, (12 May 1995); https://doi.org/10.1117/12.209110

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available